The EIGER sliding driveway gate with its contemporary design allows total occultation for greater privacy.
Description : Flat-topped Sliding Gate with horizontal solid infill Material: Aluminium Colour: Anthracite grey (RAL 7016) Dimensions : Width 348 cm x Height 147 cm Total width required with clearance : 832 cm Minimum height of pillars: 160 cm Inspired and designed in France
If you wish to motorise your sliding gate, Casanoov suggests packs in the "Sliding Gate" category You will find promotional packs offering you a set consisting of a sliding driveway gate of your choice accompanied by the appropriate automation.
In case your installation requires pillars, promotional packages are also available containing a sliding driveway gate of your choice, together with two aluminium posts to match the chosen entrance gate. FYI : The minimum pillar height for this gate is 160cm
The EIGER model is also available in other sizes and colours. For a harmonious exterior, we propose matching swing gates, garden gates and fences.
Driveway gate delivered in kit form. Clear instructions, quick and easy assembly. You will find all the necessary information about this product in the technical data.
It is technically possible to install your gate with an opening from the right to the left. You will find all the information you need to change the opening direction in our installation instructions. Our installation instructions for sliding gates have been designed to offer you two different installation methods depending on the chosen opening direction: from left to right or from right to left. For further information, please contact our customer service via our contact form.
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This 20x20cm EIFEL post with a height of 166cm is suitable for all aluminum gates and gates not exceeding 140cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.66 m Pole section: 20 x 20 cm Section of the patina: 25 x 25 cm Installation method: To screw or seal Maximum height of the gate to be installed: 140cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates 140 cm high The EIFEL 20x20cm post is available in a height of 190cm. Also available in section: 10x10cm; 15x15cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Assembly instructions - KIT-000029
