The SUNNY swing driveway gate with its graphic design will bring modernity and elegance to your entrance thanks to its unique decorative panels with their "Pebbles" style patterns
Description : Modern swing gate with vertical decorative panels Material : Aluminium Colour : Anthracite Grey (RAL 7016) Type of pattern : "Pebbles" Dimensions : Width 350 cm x Height 161 cm Required width between pillars : 355 cm Minimum height of pillars : 175 cm Inspired and designed in France
This do-it-yourself modern double gate kit with laser design contains :: - 16 powder coated slats (Height 16 cm) - 2 reinforced powder coated slats for motorisation (Height 16 cm) - 2 decorative aluminium panels with "Pebbles" pattern (Thickness 20/100) - 2 upper hinges - 2 bottom hinges - 1 central stop - 2 reception stops - 1 sash lock - 1 double handles (Black colour) - Set of 5 keys - Finishing caps - Screws and bolts
If you wish to motorise your double leaves gate, Casanoov suggests packs in the "Swing Gate" category You will find promotional packs offering you a set consisting of a swing driveway gate of your choice accompanied by the appropriate automation.
In case your installation requires pillars, promotional packages are also available containing a swing driveway gate of your choice, together with two aluminium posts to match the chosen entrance gate. FYI : The minimum pillar height for this gate is 175cm
The SUNNY model is also available in other sizes and colours. For a harmonious exterior, we propose matching sliding gates, garden gates and fences.
To further adapt your swing gate to your project, all our double gate gates can be cut to width (For an asymmetrical design for example or a narrower entrance).
And for even more customisation, you can change the direction or position of the decorative plates.
Driveway gate delivered in kit form. Clear instructions, quick and easy assembly. You will find all the necessary information about this product in the technical data.
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This EIFEL 15x15cm post with a height of 190cm is suitable for all aluminum gates and gates not exceeding 180cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.90 m Post section: 15 x 15 cm Section of the patina: 20 x 20 cm Installation method: To screw or seal Maximum height of the gate to be installed: 180cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates of height 160 and 180 cm The EIFEL 15x15cm post is available in a height of 166cm and in a matt white color Also available in section: 10x10cm; 20x20cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Technical drawings
Swing gate 3,5m SUNNY H.160cm grey aluminium
Swing gate 3,5m SUNNY H.160cm grey aluminium
Aluminium Post 15x15 EIFEL H.190cm - Anthracite Grey
Assembly instructions - KIT-000171
