Need a modern sliding gate that combines discretion and elegance? Discover our VEYMONT range.
The VEYMONT aluminum sliding gate features a contemporary and minimalist style, with vertical slats of varying widths. This arrangement creates a unique visual effect, combining asymmetry and refinement. The distance between the slats ensures optimal air circulation while preserving privacy. It's an excellent choice for those looking for a modern sliding gate for their outdoor spaces.
Sliding Gate: Ideal Solution for Small Spaces and Sloping Land
A sliding gate is the perfect choice for optimizing the space in your driveway, especially if it's limited. Thanks to its side opening, it's ideal for situations where a swing gate would be restrictive. It facilitates vehicle passage without requiring any backing up, and can be installed on a sloping driveway. If you're looking for even more convenience, a sliding gate motor allows you to automate its opening, for easier and smoother daily use.
This sliding gate has a wind resistance of 55 km/h.
Material: Aluminum Color: Anthracite Gray - RAL 7016 Dimensions: Width 303 cm x Height 157.9 cm Total width required with clearance: 656.8 cm Minimum pillar height: 175 cm
Aluminum is highly resistant to temperature changes, whether hot or cold. It doesn't warp and remains in excellent condition, even after years of use. This robust material is built to last while maintaining its beautiful appearance. With aluminum, you're simply choosing a reliable solution suitable for all conditions.
Need posts?
Posts are not included in our kits, as they are not necessary if you already have exterior pillars or posts for installing your product.
If you need pillars, we offer promotional packs that include the product of your choice with two suitable posts. To ensure a safe and stable installation of your sliding gate, the posts must be at least 175 cm high and at least 15 cm wide.
How should I maintain my aluminum product?
Aluminum requires very little maintenance. To maintain its shine and durability, clean it once or twice a year with warm, soapy water and a soft cloth. Rinse and dry thoroughly, and avoid abrasive products or high-pressure cleaning, which could damage the powder coating.
Need help choosing your sliding gate? Contact our customer service via our online form.
The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 300 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 250W Input power: 220VAC ±10%/110VAC ±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 300 kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included in the motor.
This kit contains: - 1 motor - 2 4-button remote controls with protective covers. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage
The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys is possible. This disengages the motor's output pinion and allows you to operate your gate freely. The flashing light and photocells are not included.
RANGER C300 motor features:
- Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate release. Using the provided key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle.
You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation tips:
To successfully connect and configure your motor, proceed step by step and verify proper operation between each step. If you combine accessories with your C300 motor, check each time that your motor is in working order. Finally, ensure proper wiring of your electrical connection. This will help you manage your system and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000424
