The EIGER sliding driveway gate with its contemporary design allows total occultation for greater privacy.
Description : Flat-topped Sliding Gate with horizontal solid infill Material: Aluminium Colour: Anthracite grey (RAL 7016) Dimensions : Width 390 cm x Height 178 cm Total width required with clearance : 832 cm Minimum height of pillars: 190 cm Inspired and designed in France
If you wish to motorise your sliding gate, Casanoov suggests packs in the "Sliding Gate" category You will find promotional packs offering you a set consisting of a sliding driveway gate of your choice accompanied by the appropriate automation.
In case your installation requires pillars, promotional packages are also available containing a sliding driveway gate of your choice, together with two aluminium posts to match the chosen entrance gate. FYI : The minimum pillar height for this gate is 190cm
The EIGER model is also available in other sizes and colours. For a harmonious exterior, we propose matching swing gates, garden gates and fences.
Driveway gate delivered in kit form. Clear instructions, quick and easy assembly. You will find all the necessary information about this product in the technical data.
It is technically possible to install your gate with an opening from the right to the left. You will find all the information you need to change the opening direction in our installation instructions. Our installation instructions for sliding gates have been designed to offer you two different installation methods depending on the chosen opening direction: from left to right or from right to left. For further information, please contact our customer service via our contact form.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC±10%/110VAC±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included with the motor.
Accessories included:
- Two 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage 1 pair of infrared photocells with the following characteristics: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX 1 flashing LED light with a power of 3W (equivalent to a power of 30W for an old-generation incandescent bulb) with the following characteristics: - Operating voltage: 12-265 VAC/DC - Load capacity: < 3W - Flashing frequency: 1Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motorization features : - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate unlocking. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can pair this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it is working properly between each step. If you pair accessories with your C600 motor, check each time that your motor is in working order. Finally, ensure that your electrical connection is properly wired. This will help you operate your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000036
