Casanoov
Basket

0 items added to your cart

My cart

SKU: 

Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 1
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 2
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 3
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 4
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 5
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 6
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 7
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 8
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 9
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 10
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 11
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 12
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 13
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 14
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 15
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 16
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 17
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 18
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 19
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 20
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 1
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 2
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 3
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 4
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 5
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 6
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 7
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 8
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 9
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 10
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 11
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 12
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 13
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 14
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 15
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 16
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 17
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 18
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 19
Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300 thumbnail 20
thumb
  • This kit includes :
  • Aluminium sliding gate VOGEL grey
  • Width: 586cm and Height: 140cm
  • Rack motorization (Up to  300kg)
FREE MOTOR

Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300

PAC-002118

3587 €

3489 €

FREE MOTOR: Until 06/01: The RANGER C300 motorization is FREE with the purchase of a sliding gate.

In stock
delivery FREE delivery between 22/12 and 25/12
  • This kit includes :
  • Aluminium sliding gate VOGEL grey
  • Width: 586cm and Height: 140cm
  • Rack motorization (Up to  300kg)
Secure payment

Secure payment

Delivery within 5 days

Delivery within 5 days

Free shipping

Free shipping

Sliding gate kit 6m VOGEL H.140cm + motor RANGER C300

3587 €

3489 €

-5%

between 0 € and 1499.99 €*

-7%

between 1500 € and 2999.99 €*

-10%

greater than 3000 €*

*HT orders

Description

Sliding gate kit 6m VOGEL H.140cm grey aluminium

Are you looking for a modern and sleek sliding gate to enhance your exterior? Discover our VOGEL range.

The VOGEL openwork sliding gate boasts a modern and sleek design, ideal for enhancing your exterior. Thanks to its spaced horizontal slats, it allows excellent natural light …

RANGER C300 sliding gate motorization

The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate.
This rack-and-pinion motor is suitable for all types of sliding gates …

4-meter nylon rack for sliding gate GEAR

The GEAR 4-meter nylon rack is specially designed for motorized sliding gates. It consists of 12 segments, each 33 cm long, with integrated mounting eyelets for quick and easy installation.

Sliding gate kit 6m VOGEL H.140cm grey aluminium

Are you looking for a modern and sleek sliding gate to enhance your exterior? Discover our VOGEL range.

The VOGEL openwork sliding gate boasts a modern and sleek design, ideal for enhancing your exterior. Thanks to its spaced horizontal slats, it allows excellent natural light to circulate while providing protection from prying eyes. Its timeless style adapts to any environment, adding a touch of elegance to your entrance. Made of aluminum, the VOGEL sliding gate guarantees strength and durability, while offering an optimal security system. Choosing the VOGEL aluminum sliding gate combines aesthetics, functionality, and durability for a secure and harmonious exterior.

Sliding Gate: Space Saving and Security

With its side opening, the sliding gate is the perfect solution for those with limited space. Unlike swing gates, they require no setback. This advantage is particularly useful for small entrances or sloped access points. In addition to its practicality, it offers enhanced protection thanks to its robust structure and high-performance locking systems. For even greater convenience, a sliding gate motor allows for automated opening and closing, ensuring smooth and secure daily use.

This sliding gate has a wind resistance of 60 km/h.

Material: Aluminum
Color: Anthracite Gray - RAL 7016
Dimensions: Width 587 cm x Height 145 cm
Total width required with clearance: 1,174 cm
Minimum pillar height: 160 cm
Inspired and designed in France

This kit contains:
- 21 powder-coated aluminum slats (width 15.5 cm)
- 1 upper guide with 6 nylon rollers
- 11.3 m steel guide rail
- 6 steel rollers
- 1 receiving strike plate
- 1 receiving stop
- 1 end stop
- 1 cylinder lock
- 1 handle (black)
- 5 keys
- Finishing caps
- Screws

About the Material

Aluminum stands out for its lightness, strength, and corrosion resistance. This material does not rust and retains its appearance over time, even in the face of adverse weather conditions. Easy to maintain, simple regular cleaning is enough to preserve its original shine. Durable and attractive, aluminum is ideal for your outdoor landscaping, offering a modern and high-performance solution. By choosing aluminum, you combine practicality, longevity, and elegance every day.

Need posts?

Posts are not included in our kits, as they are not necessary if you already have exterior pillars or posts for installing your product.
If you need pillars, we offer promotional packs that include the product of your choice with two suitable posts.
To ensure a safe and stable installation of your sliding gate, the posts must be at least 160 cm high and at least 20 cm wide.

How should you maintain your aluminum structure?

Aluminum requires little maintenance, but regular cleaning extends its lifespan. Once or twice a year, simply use warm soapy water and a soft cloth, then rinse and dry thoroughly. Avoid abrasive products and high-pressure cleaning, which can damage the lacquer.

Need help choosing your sliding gate?
Contact our customer service via our online form.

Product delivered in kit form

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

RANGER C300 sliding gate motorization

The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate.
This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized.
Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 300 kg.

Here are the main technical specifications of the motor:

Motor voltage: 230V – 250W
Input power: 220VAC ±10%/110VAC ±10%
Frequency: 50Hz/60Hz
Gear module: M4 Z=16 teeth
Output torque: 30.0 Nm
Nominal rotation speed: 14,000 rpm
Maximum gate weight: 300 kg on level ground
Magnetic start and end stops
Environmental temperature: -25°C ~ +55°C
Protection class: IP55
Opening speed: approximately 12 meters per minute
Maximum force: 1100N
Nylon rack
Control card included in the motor.

This kit contains:
- 1 motor
- 2 4-button remote controls with protective covers. Batteries are included.
- Nylon rack (4m – 12 pieces of 33cm)
- Installation and setup manual
- 2 quick release keys in case of power outage

The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
The flashing light and photocells are not included.

RANGER C300 motor features:

- Opening according to your choice: left to right (factory mode) or right to left.
- Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice.
- Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds.
- Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way.
- Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power.
- Manual gate release. Using the provided key, you can disengage the opening of your gate and operate it manually.
- Auto-stop. The gate stops if it encounters an obstacle.

You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.

Installation tips:

To successfully connect and configure your motor, proceed step by step and verify proper operation between each step. If you combine accessories with your C300 motor, check each time that your motor is in working order. Finally, ensure proper wiring of your electrical connection. This will help you manage your system and prevent electrical leaks.
Our Casanoov technical team is here to assist you if needed.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

4-meter nylon rack for sliding gate GEAR

The GEAR 4-meter nylon rack is specially designed for motorized sliding gates. It consists of 12 segments, each 33 cm long, with integrated mounting eyelets for quick and easy installation.

This kit contains:
- 12 segments of 33 cm each

The assembly forms a solid and durable 4 m rail, perfectly suited to gate motorization systems.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

Technical data

  • Warranty

    2 an(s)

  • Assembly time

    8 h

  • Sleeper Section

    70*30 mm

  • Blade width

    155 mm

  • Handle colour

    Black

  • RAL

    7016

  • Operating clearance

    26 mm

  • Amounts Section

    78*47 mm

  • Stud thickness

    1.5 mm

  • Pattern / Design

    VOGEL

  • Thickness of the blades

    1.2 mm

  • Compatible motorization type

    Sliding

  • Sleeper thickness

    1.2 mm

  • Height

    146.5 cm

  • Exists by beating

    No

  • Assembly instructions

    Yes

  • Eligibility Extended warranty 5 years

    No

  • Required discharge length

    6 m

  • Main material

    Aluminium

  • Eligibility Extension of warranty 10 years

    No

  • Length of steel rail

    11 m

  • Supplied accessories

    Yes

  • Number of casters

    6

  • Type of lock

    5 keys

  • Locking system

    Barrel lock

  • Width

    586.5 cm

  • Width between pillars

    562 cm

  • Rod assembly

    Self-drilling screws

  • Stud/rail assembly

    Self-drilling screws

  • Recommended number of persons for assembly

    2

  • Required pillar height

    160 cm

  • Colour

    Charcoal grey

  • Opening system

    Sliding

  • Opening direction

    left to right / right to left

  • Guide system

    Upper guide with 6 nylon olives

  • Finishing

    Sand mat

  • Compatible engines

    Yes

  • Handle material

    Aluminium

  • Frame material

    Aluminium

  • Type of filling

    openworked

  • Wind resistance

    60 km/h

  • Type of mechanism

    Sliding

  • Compatible for portals

    Aluminium, pvc, wood, iron

  • Power

    230 V

  • Supply voltage

    220VAC±10%/110VAC±10%

  • Power consumption

    250 W

  • Nominal operating thrust

    1090 Nm

  • Maximum thrust

    1100 Nm

  • Rotational speed of the pinion in revolutions per minute

    1400

  • Opening / closing speed in meters per minute

    12m/min

  • Opening time for a 3m gate

    15 s

  • Gate weight up to

    300 kg

  • Engine rain protection

    IP55

  • Operating temperature

    -25°C to +55°C

  • Opening right to left

    Yes

  • Opening left to right

    Yes

  • Manganese limit switches

    Yes

  • Mechanical spring limit switches

    No

  • Gable material

    Alloy

  • Number of sprocket teeth

    16

  • Automatically programmable closing after opening

    Yes

  • Manual release

    Yes

  • Co-ownership mode

    Yes

  • Obstacle detection

    Yes

  • Photocell Compatible

    Yes

  • Flashing light compatible

    Yes

  • External battery compatible

    No

  • Keyboard compatible

    Yes

  • Key lock compatible

    Yes

  • Gradual opening / closing

    Yes

  • Adjustment of opening and closing speed

    Yes

  • Maximum number of associable remote controls

    30

  • Number of remote controls included

    2

  • Number of remote control keys

    4

  • Nylon rack included

    Yes

  • Instructions / screws included

    Yes

  • Infrared photocells included x2

    No

  • LED flashing light included

    No

  • Gross weight

    7 kg

  • Partial pedestrian opening

    Yes

  • Warranty

    2 an(s)

  • Eligibility Extended warranty 5 years

    No

  • Eligibility Extension of warranty 10 years

    No

  • Assembly time

    4 h

  • Recommended number of persons for assembly

    2

  • Assembly instructions

    Yes

  • Mounting accessories supplied

    Yes

Questions from our customers

All our products have a 2-year commercial warranty. 

All our products are delivered in kit form and to be assembled by you.
We have designed and imagined our products so that they are easy to assemble, and your customer experience is pleasant.
We have provided you with clear assembly instructions that you can download.
All the accessories necessary for the installation of your portal are provided to you, and everything that is included in our portals is specified in the technical characteristics of the product as well as in the description.

You can find all this information on each of our product sheets through these different tabs:

  1. In the “Technical characteristics” tab
  2. In the “Technical drawing” tab
  3. In the “Assembly instructions” tab

If, upon receipt and assembly of your products, you have any questions about the installation, you can always contact us through the Casanoov contact form.

For orders where all products are advertised as "In stock", we do our best to prepare your order in less than 24 hours.

Delivery times are communicated to you on each of our product sheets.

  1. To do this, look for the model you want, you will then find its product sheet:
  2. The delivery time will be notified directly on the product sheet, next to the add to cart button

For orders with products "in reservation", preparation and delivery take place at the time of the effective return to stock. 

We offer you in full consciousness a longer delivery time to allow you to receive your entire order in a grouped manner.

You are advised to place two different orders if you wish to receive the products in stock more quickly and place a second order with the products for which we are awaiting stock.
Our delivery costs are free, so this will have no impact on your final cost.

You can contact us via the contact form, section "Question about a product". We will do our utmost to provide you with all the help you need and to answer your questions about our articles.

A Question/Answer system will be set up very quickly on each of our products so that your questions can also help the Casanoov community in their choice!